Want to Buy Good used 45mm piston for Husqvarna 350

[jeffbecky1]

Good used 45mm piston for Husqvarna 350, also need .325 sprocket and clutch with needle bearing, and one black plastic air injection piece located behind the starter cover

 

[Sellseverything]

U STILL LOOKING FOR PARTS?
I AM PRETTY SURE I HAVE EVERYTHING U R WANTING

 

[jeffbecky1]

Yes I still need parts, except instead of .325 sprocket , I need a the clutch drum that takes a rim sprocket. Don't really need the little black plastic piece. Do u have pics of the piston?

 

[Sellseverything]

I will take some tomorrow at work for you. I will check in the other also. So no plastic needed now.?


Sent from my iPhone using Tapatalk

 

[jeffbecky1]

I would prefer a flat top piston over the dished one if you've got one

 

[Sellseverything]

Okay. I will check tomorrow and let you know for sure.


Sent from my iPhone using Tapatalk

 

[Sellseverything]

I have a brand new piston (FLAT)
Part # 503899603

Sent from my iPhone using Tapatalk

 

[Sellseverything]

Do u need both of these?

Sent from my iPhone using Tapatalk

 

[jeffbecky1]

Unfortunately the piston you have is a 44mm and I need a 45mm piston. Do you have a clutch to go along with the sprocket drum? Also, I'm needing an orange top cover clip for a 346xp.

Thanks,
Jeff

 

[RedneckChainsawRepair]

You talking the dished oem 45mm piston? Have one here. Why not just buy a meteor 45mm flat top for 353?
Think I may still have a orange clip too. 346 357 clips the same?

 

[Sellseverything]

Okay. I will check tomorrow on the clutch, but I am pretty sure I do have one.

I will also check on a clip. I am not so sure I will have one of those though.
Is it a grey clip?

 

[jeffbecky1]

You talking the dished oem 45mm piston? Have one here. Why not just buy a meteor 45mm flat top for 353?
Think I may still have a orange clip too. 346 357 clips the same?

I prefer the flat top. I believe the clips are all,the same

 

[RedneckChainsawRepair]

I prefer the flat top. I believe the clips are all,the same

Then you want a 353 piston for the 350.

 

[jeffbecky1]

Do u need both of these?

Sent from my iPhone using Tapatalk

Did you find a clutch or top cover clip?

 

[jeffbecky1]

Then you want a 353 piston for the 350.

How much for the clip?

 

[jeffbecky1]

Then you want a 353 piston for the 350.

How much for the dished piston too?

 

[Sellseverything]

The dished piston I have goes with the cylinder I have. wanted to try and keep them all together.
I do have a clutch also. I will check on clip today.

 

[RedneckChainsawRepair]

I think I have a clutch I took off a 346 which will work. Have the dished 45mm and clip. Need to make sure on complete clutch.

 

[nmurph]

I think I have a clutch I took off a 346 which will work. Have the dished 45mm and clip. Need to make sure on complete clutch.

If Kevin doesn't have a satisfactory clutch/bearing/drum/rim, I know I do.

 

[RedneckChainsawRepair]

No bearing no drum no rim and havent went out to check on complete clutch yet. 1 more mug of coffee to go..........