Bob Wilkie
ArboristSite Lurker
I have a Husqvarna 359 that won't idle. Cuts good at full throttle but dies every time at idle. I pulled the carb and it is a Walbro HDA 175, which has been discontinued, and from what I can pick up here, replaced with a HDA 199. Without springing for a new carb, is it possible to use the soft parts from the HDA 199 on my carb?
I plan to arm myself with a mitt vac and leak test this also, while I have it on the bench. Any ideas from those experienced folks out there are welcome.
I plan to arm myself with a mitt vac and leak test this also, while I have it on the bench. Any ideas from those experienced folks out there are welcome.