Help with STIHL 044 tank vent

[chainsawredeemer85]

Hey guys I need some help. I purchased a cpl stihl 044s awhile back and I finally got one built but didn't realize I don't have the tank vent. I am posting a cpl photos, 1st one is the OD of the nipple where the tank vent gets installed. It measures 8mm. The second is the serial number ( although I may have mixed the tanks up). The third and 4th are of the other tank, it's measurement and the vent it has which consist of a stem, filter, and cap. I looked on ebay and do see a cpl different styles but would like to be sure before I buy. Any help would be appreciated thanks!!

 

[singinwoodwackr]

Ah, duplicate posts…
Get the IPL from Benson. I think there are 3 different vent types for those tanks.

 

[chainsawredeemer85]

Ah, duplicate posts…
Get the IPL from Benson. I think there are 3 different vent types for those tanks.

Sorry I didn't mean to post twice who is Benson? I pulled an IPL but still can't tell which one I need

 

[singinwoodwackr]

Sorry I didn't mean to post twice who is Benson? I pulled an IPL but still can't tell which one I need

Ray. He’s the IPL, manual guru…beg for manuals thread
all I have on this pad is the 066 which will be similar but not exact. It shows 3 types. Your pics correspond to one of the 3 as far as I can see. Note the pt#s and search eBay for those.

 

[HarleyT]

See if this is helpful.

 

[HarleyT]

Another one.

 

[HarleyT]

Yet another.

 

[singinwoodwackr]

Yours kinda looks like the middle one.

 

[singinwoodwackr]

Yet another.

Looks like the right one

 

[HarleyT]

Benson.