Hey J-red guys...

[kruege84]

Any chance of getting 70E P/C on a 621?

And a little off topic, but this place hasn't changed much. I haven't been around in a while, but the first thread that showed up in the chainsaw forum still had "361" in the title...

 

[Turkeyslayer]

Dont know, but welcome back!

PS The 2156 is WAY better than the 361!

 

[SawTroll]

If that was possible, we would have heard of it before - so NO.

The 70 is a larger and much heavier saw, not on the same case.

 

[thechainsawguy]

If you need a good piston and cylinder I have one, you can pm me if interested, Dave.

 

[taplinhill]

If that was possible, we would have heard of it before - so NO.

The 70 is a larger and much heavier saw, not on the same case.

I agree, it is not a simple bolt on upgrade.

 

[Cantdog]

P&c

If you need a good piston and cylinder I have one, you can pm me if interested, Dave.

Dave do you have a P&C for the 70E or the 621?? Don't mean to butt in but just askin'.

 

[thechainsawguy]

Dave do you have a P&C for the 70E or the 621?? Don't mean to butt in but just askin'.

Yes I have a good 621 cylinder and piston, but it only has one ring, the top one was stuck and it broke when trying to free it, Dave.

 

[Cantdog]

P&c

Yes I have a good 621 cylinder and piston, but it only has one ring, the top one was stuck and it broke when trying to free it, Dave.

Thanks for the come back Dave. I was just wondering as I am looking for a P&C for a 70E late model. I am all set for 621s as I have two complete NOS P&Cs for those. If you should happen across even a piston for a 70E new or used/usable PM me as am in search. Thanks again.