cus_deluxe
Commie Satan turd
I know im not the only one ever to do this but am pretty happy with the way its turning out so far, and wanted to show some pics. I bought a HF motorcycle/atv lift for $100 on sale (i think $149 regularly). They normally lift to about 16", but im modifying this one to lift to about waist-height. It certainly reduces the lifting capacity of the lift (1500 lb in stock form) but i dont plan on putting anything more than a few hundred pounds on it anyway. This is a stock photo from HF website.
This is a photo after the lift arms were lengthened using 2" C-channel.
And this is a photo after the legs were lengthened and widened using 2"square tubing.
Still have to finish the table for the top, I plan to use more square tubing for a backbone and 3/4" plywood for the top and probably a border of small angle steel to tie it all together.
This is a photo after the lift arms were lengthened using 2" C-channel.
And this is a photo after the legs were lengthened and widened using 2"square tubing.
Still have to finish the table for the top, I plan to use more square tubing for a backbone and 3/4" plywood for the top and probably a border of small angle steel to tie it all together.