Homelite Chainsaws

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
56871B inner 56872C outer
3dac0f3aab82023b66872c0972dfacd4.jpg
 
I have a C series IPL manual coming in the mail for my C72.
Can someone tell me if the guide bar plate shims part numbers are 65956B and 56957B ?

These part numbers will work also for your C72. Homelite made alot of saws with that large mount and all the plates swap.
 
I thought I had found a problem with the C72 piston. It seem there was to much play between the wrist pin and piston.
As I was removing the wrist pin keeper the little devil went flying and I can't find it.
After I got the pin out the needle bearing looks fine and the play not as bad as I thought. Natural for a needle bearing I believe.
I have a C series manual ordered and as soon as I get the keeper part number I will try and find one and order two. LOL
Well, I thought I sent this yesterday trying to be funny, but must have forgot to hit the send button.

Your spring is under the fridge. Even if you are in another room. Because little springs always land under the fridge.
 
Hey Clint,
I just sent the Greek a message for several sets of 55038 Caber rings, if he has them I'll let you know. I've used many for my 770D and C saws.

Al D.

Sent from my SM-G986U using Tapatalk
Thank you so very much Al.
I'm at a stand still on the C72 now.
Just let me know either way.
Clint
 

Latest posts

Back
Top