I have the 026 running well now and I was wondering if I should mod this muffler. (Sorry to all the basketball fans for dropping the muffler on the basket ball player).
How should I mod this 026 muffler?
- Thread starter fossil
- Start date
Help Support Arborist Forum:
Dan_IN_MN
Addicted to ArboristSite
Open up the exit some.....adjust your H to give it a bit more fuel.....try it.....open it more if you want. You could try two more holes on either side of the one in the center.
OH....nice clear pics! REP sent!
OH....nice clear pics! REP sent!
Last edited:
FATGUY
Addicted to ArboristSite
here's one I did a few years back
Nice work! To bad Husqvarna is just to many letters!
jus2fat
Two Harley Fatboys
I just did one just like that. I drilled a 5/16 hole directly above and below the existing hole. The outlet I thought was big enough I didn't mess with it. Adjusted the carb. a little and it runs great. A definite must do.
Bubbles Up
ArboristSite Operative
Fatguy,
That is just some excellent work! I guess you had time to work on the while the Leafs win the cup!!! LMAO.
While you are STIHL waiting wanna make another one????
That is just some excellent work! I guess you had time to work on the while the Leafs win the cup!!! LMAO.
While you are STIHL waiting wanna make another one????
Sweet!
Dan_IN_MN
Addicted to ArboristSite
Dan_IN_MN
Addicted to ArboristSite
You can always tell the guys with the CNCs with too much time on their hands! YES ....I want a CNC mill!
Nic....Do you have a pic of the muffler showing the saw?
Anthony_Va.
XPW Fan Club
Do you have the adjustable H on your carb? If not then you might not be able to do much with it till you switch carbs.
That's what I was looking for. Thanks 50 blues
Anthony, I do have the adjustable carb so I should be good to go. Thanks
woodyman
Addicted to ArboristSite
I say go big and loud.I just finished this one on a ported 026 I did.It has a spark screen on it now.Before you make any holes in that muffler make sure you have an H adjustment.
Last edited:
