I'm rebuilding carb on 235 and taken the two adjusting screws out to clean etc, I've now mixed the two screws up and can't remember which goes in the low and high side. One is longer then the other, am I correct in guessing that the longer one goes in the low side. Thankyou for your time.
Huskqvana carby adjusting screws
- Thread starter cheekyBob
- Start date
Help Support Arborist Forum:
I believe the longer one is the L screw (closest to the cylinder). If they are the right way around they should both pertrude about the same distance from the carb body when screwed in to lightly seated
Update, replaced screws as advised and all is up and running again. Thankyou for infoThankyou for the info JD, much appreciated
