Big_Wood
westcoast dweller
This saw is a spare that I will never use, I got it seized and soaked it for 4 days breaking it free. Was a little rough at first but the bottom end has smoothed out and is tight. I got some pics of some repairs I did to get it to the way it is. These are after I had already broke it free and ran a bunch of fuel through it. You will see in the pics the dawg bolts are 6mm instead of 5. It had no dawgs on it when i got it and the holes had already been tapped by someone in the past so I just drilled the spike to take the larger bolt.
Starting with the oiler which had seized and cooked the worm gear. I have a bunch of spare parts on hand so in goes used oiler and worm gear.
Nubs on worm gear installed are worn but functional. It's all I had handy.
Little bit of silicone grease on the worm gear and installed
Little bit of moly for the drum bearing.
Here's a pic of the clutch cover I had for it. Cracked but it works
No damage on the recoil side except a chipped tooth on the pulley. This isn't even noticed as the pulley grabs both pawls at same time. Again, what I had for it.
I thought I got more pics of the muffler removal. One screw was round so I drilled the head off the get it off. After that the stud turned out easy. Here's the only hole in the muffler. I could have zapped it closed but the welders put away so another day.
After drilling the head off the old bolt a piece of the head was still stuck in the muffler and difficult to remove. Worked out perfect cause now I don't have to cut the bolt I have for it lol
Little bit of loctite on the screws
Done but not before a piston pic
I will edit any screw ups on the computer in a few here. I'm not quite sure what to ask for it yet but I will think about it and price it this evening.
Starting with the oiler which had seized and cooked the worm gear. I have a bunch of spare parts on hand so in goes used oiler and worm gear.
![fab8dd4ecae3975379760d2bd71575b6.jpg](https://proxy.imagearchive.com/cc6/cc6bfc67798040dff31cddef4f31c6c7.jpg)
![190016d713865bb91a91ab38f462380b.jpg](https://proxy.imagearchive.com/d70/d70dae30a400dcaba669e860ce205fbe.jpg)
Nubs on worm gear installed are worn but functional. It's all I had handy.
![5bb645f99761c20b5a3261c18a75852d.jpg](https://proxy.imagearchive.com/1e2/1e2565a657751c923eed0f6f5d7e4b2b.jpg)
Little bit of silicone grease on the worm gear and installed
![8b43dda8c7276143db9171c520f2cb4e.jpg](https://proxy.imagearchive.com/9ba/9ba3deb8e64353cb6315ae65deb84f97.jpg)
Little bit of moly for the drum bearing.
![365284ce73ce716a7bfb964485e0fe54.jpg](https://proxy.imagearchive.com/823/823d3ca2c4ea5915807f301cc7b4f0f5.jpg)
Here's a pic of the clutch cover I had for it. Cracked but it works
![7152121496726e5f6812d17fad9861c8.jpg](https://proxy.imagearchive.com/6e9/6e9a73d77cd8ee07ec316c8f023d0a3a.jpg)
No damage on the recoil side except a chipped tooth on the pulley. This isn't even noticed as the pulley grabs both pawls at same time. Again, what I had for it.
![6f701ade69a77833176d3e67327a671b.jpg](https://proxy.imagearchive.com/b99/b99b3bc201a6642c1f831173eb0f122e.jpg)
I thought I got more pics of the muffler removal. One screw was round so I drilled the head off the get it off. After that the stud turned out easy. Here's the only hole in the muffler. I could have zapped it closed but the welders put away so another day.
![189dffea2e0384a4dcd4209135ad132a.jpg](https://proxy.imagearchive.com/d48/d4896ca27b6a83a9140996139936f16c.jpg)
![2909f6c282b872b8f5e2e0a7f4a7b680.jpg](https://proxy.imagearchive.com/dae/dae65235e794a071012ddc5a21169807.jpg)
After drilling the head off the old bolt a piece of the head was still stuck in the muffler and difficult to remove. Worked out perfect cause now I don't have to cut the bolt I have for it lol
![aeb2966fd8f1865943f592bdf69b6b75.jpg](https://proxy.imagearchive.com/d8c/d8cead13bec5afe827c037db7d312f0f.jpg)
Little bit of loctite on the screws
![434b2f3f056b826c1610425aad55ef80.jpg](https://proxy.imagearchive.com/d87/d87ada570df70a3bb36089f641fd531a.jpg)
Done but not before a piston pic
![fb2146037b7129f8409677caa10ca2bb.jpg](https://proxy.imagearchive.com/6e2/6e24811526fa1bb2fe402e2f8c01114e.jpg)
![2aafae5259598ff4b9d1c9d94289805f.jpg](https://proxy.imagearchive.com/a02/a029e53b0d97f69c835c8608fa150140.jpg)
![ad3b84325cf15e4cadbd8f70564d1179.jpg](https://proxy.imagearchive.com/683/683bbc669fc458ec6ae1410315075244.jpg)
![1dd3c636e6b5352f3af5b683410cd5f4.jpg](https://proxy.imagearchive.com/c07/c0759dcc52a7e1f8630c089f6e9bc31c.jpg)
![9fd35694ea661df7ee6678b577ceeac3.jpg](https://proxy.imagearchive.com/c19/c1934d94fec3003b55eea309dc6f41e6.jpg)
![aca2112d85ef93259b21443b8ba85e28.jpg](https://proxy.imagearchive.com/bf9/bf99bcd2498f8cb8c5733210f61b218d.jpg)
I will edit any screw ups on the computer in a few here. I'm not quite sure what to ask for it yet but I will think about it and price it this evening.