husky crank bearing part numbers

[iwannachopwood]

so husky dealer has the SKF 6202 C3 for 30$. Big city bearing supplier says they are NLA. he suggests NSK 6202 C3 13$, or 6202 ZRS, 15$
my question looking for a good part number bearing to put use in my build, maby cheaper if i can get at big city bearing supplier

 

[Tomos770]

Those bearings are like 4-5euros over here...

SKF....NSK....INA.....doesnt matter

 

[cscltd]

I try to purchase bearings that are not made in that country that makes everything else for as cheap as possible

 

[ballisticdoughnut]

If your local husky dealer has the OEM bearings buy them and be done with it.

 

[Chevboy0167]

https://www.ebay.com/itm/165477625711
https://www.ebay.com/itm/163963915877

 

[bwalker]

Nachi makes good stuff. They supplied alot of bearings for Honda two stroke bikes.

 

[user 74409]

Check out SKF 6202 C3 15x35x11mm Open Unshielded SKF Radial Deep Groove Ball Bearing on eBay!

https://www.ebay.com/itm/1657345365...id=8Ti7sDPyQZO&widget_ver=artemis&media=EMAIL

 

[huskihl]

I use Nachi and NTN. Save the SKF for the wheelbarrow

 

[Tomos770]

You can also buy those with closed cage if they are available.....and pry covers later....after that its the same open bearing!

 

[iwannachopwood]

If your local husky dealer has the OEM bearings buy them and be done with it.

@30$ Can dollars each plus tax that’s like 25$ usd. Was just trying to get a little better deal lol unless that’s going rate