It's a long shot, but does anyone have a true roller nose bar to sell for small mount Husky, 16", .050" gauge?
Want to Buy Husky Small Mount 16" Roller Nose Bar
- Thread starter blsnelling
- Start date
Help Support Arborist Forum:
.
Cannon wants $343 for a 16" bar!!! CCP-C1-16-50-R I don't think so!
LonestarStihl
Addicted to ArboristSite
I have a roller bar I'll check for you. It's close to the husky mount I know but not exact. I haven't been considering selling it but I'll see if it'll fit and consider it
Thanks.
Your still mad about the ms193t
.
Wow, that's a lot.
You could see if @Definitive Dave has one that can be milled down.
There are also some tips on ebay that I'm sure someone with a little ingenuity could make work.
LonestarStihl
Addicted to ArboristSite
Your still mad about the ms193t
Nah we are cool. But you definitely aren't getting the bar lol.
I talked to Dave. None are the small Husky mount.
No, these aren't a roller nose, but they are one of my favorite bars. Has anyone ever run .050 gauge in a .058" bar? I could pinch that down a little if need be. http://www.ebay.com/itm/401091413193?_trksid=p2060353.m1438.l2649&ssPageName=STRK:MEBIDX:IT
LonestarStihl
Addicted to ArboristSite
This is the bar at the bottom right. I'll try and look up the saw on acres and get the mount pattern.
Which saw did it come from?
LonestarStihl
Addicted to ArboristSite
The craftsman. It was made by Roper. It says 3.7ps
I knew it
.I've never done it on purpose except in a pinch, and then just for a few cuts.
I have talked to logger who will run .058 in a .050 bar after it's worn that much lol.
What's the width of the bar mount? Small Husky is .325" or a hair over 5/16". What gauge is this bar?
LonestarStihl
Addicted to ArboristSite
I'll have to do that when I get home. I work till midnight. I will PM you tonight and get you all kinds of measurements and such. I haven't had it long and haven't messed with it.
LonestarStihl
Addicted to ArboristSite
Brett here asked me about it before and I had it next to a husky bar and it was very close is all I remember. I can try and mount it on my 450 Rancher as well
I do appreciate it.
LonestarStihl
Addicted to ArboristSite
No problem
It looks like you have a D176 bar mount, which is 8.0mm.
http://www.arboristsite.com/community/threads/craftsman-roper-3-7.285229/#post-5517460
http://www.acresinternet.com/cscc.n...be9970357dbcb17f88256e0e001f67e3?OpenDocument
The small Husky is 8.2mm, just a tad larger. It should be easy enough to make your bar work.
http://www.acresinternet.com/cscc.n...eb5cdbe2ec67964188256e0d00525d23?OpenDocument
Let me know what gauge the chain is and how many DL it is.
http://www.arboristsite.com/community/threads/craftsman-roper-3-7.285229/#post-5517460
http://www.acresinternet.com/cscc.n...be9970357dbcb17f88256e0e001f67e3?OpenDocument
The small Husky is 8.2mm, just a tad larger. It should be easy enough to make your bar work.
http://www.acresinternet.com/cscc.n...eb5cdbe2ec67964188256e0d00525d23?OpenDocument
Let me know what gauge the chain is and how many DL it is.
