Husqvarna 254G 1986 model first year built from what I have been told by serial number.i tore this all the way down.heres what I replaced.
Bearings,seals,worm gear,O ring on seal holder, cleaned up the cylinder it's OEM.new meteor piston and ring,fuel line,fuel filter and plug.new gas cap.replaced the wires from on the tank handle.new carb kit.i ran one tank threw it tried to see if the heated handles worked.but it was hotter then heck out when I tried.i couldn't really tell.i was already sweating my butt off.lol saw is set stock runs and oils good.$275.00
Sent from my Pixel 2 XL using Tapatalk
Bearings,seals,worm gear,O ring on seal holder, cleaned up the cylinder it's OEM.new meteor piston and ring,fuel line,fuel filter and plug.new gas cap.replaced the wires from on the tank handle.new carb kit.i ran one tank threw it tried to see if the heated handles worked.but it was hotter then heck out when I tried.i couldn't really tell.i was already sweating my butt off.lol saw is set stock runs and oils good.$275.00
Sent from my Pixel 2 XL using Tapatalk
