Husqvarna 338xpt california carb rebuild

[71cowboys]

Just picked up a 338 xpt not running, cleaned it up replaced the primer bulb. Saw will start idle but acts like it is starved for fuel if you throttle it up. I would like to rebuild the carb with a carb kit but since this is a california model it seems to have a different carb than the standard 338xpt. Carb is a zama c1q-el19b cant find the kit for this carb or Will the kit for the c1q-el33 work for me.
Thanks

 

[Grande Dog]

Howdy,
Your carb uses the Zama RB-108 Kit. The C1Q-EL33 uses RB-137. I'm sure some of the parts are the same. Have you got the locks off the adjusters?
Regards
Gregg

 

[71cowboys]

No do they need to be removed
Thanks