kyle.kipple
ArboristSite Guru
Runs good, idles in every position. Everything seems to be functioning as it should. There was a bolt missing on the top left of the recoil cover that holds the brake handle in place as well. I did put a bolt there but it is not the correct bolt. Some scuffs and dings, but nothing out of the ordinary for a used saw. Piston looks great through the exhaust port. Haven't did compression check, but I will tomorrow at some point in time.
325.00 + Shipping PHO
![IMG_1678[1].JPG IMG_1678[1].JPG](https://cdn.imagearchive.com/arboristsite/data/attachments/74/74945-634bb6bc577449582112d59c2b6a39f8.jpg)
325.00 + Shipping PHO
![IMG_1673[1].JPG IMG_1673[1].JPG](https://cdn.imagearchive.com/arboristsite/data/attachments/74/74940-b4585a579e733ec090d7005c7c8652f9.jpg)
![IMG_1674[1].JPG IMG_1674[1].JPG](https://cdn.imagearchive.com/arboristsite/data/attachments/74/74941-7108a5b8b36bb949668065627da05670.jpg)
![IMG_1675[1].JPG IMG_1675[1].JPG](https://cdn.imagearchive.com/arboristsite/data/attachments/74/74942-88bc855c066788af9796b563e74b8295.jpg)
![IMG_1676[1].JPG IMG_1676[1].JPG](https://cdn.imagearchive.com/arboristsite/data/attachments/74/74943-1aa12bd8ca4e7804f96d476bcd448654.jpg)
![IMG_1677[1].JPG IMG_1677[1].JPG](https://cdn.imagearchive.com/arboristsite/data/attachments/74/74944-bb18d83c6672358c3b08aa496e4fb7ef.jpg)
![IMG_1678[1].JPG IMG_1678[1].JPG](https://cdn.imagearchive.com/arboristsite/data/attachments/74/74945-634bb6bc577449582112d59c2b6a39f8.jpg)