Husqvarna 50 ,

[Dingo7283]

Hi Guys ,

Had a Husqy 50 for a while now and the piston has gone on it. Dealership here in New Zealand reckoned 8-900 to fix hahaha trying to get me to buy a new saw . the model number on it is 9491783 with black top and believe that is from 1989. If anyone out there can give us some good info on where and what size piston/cylinder to replace with would be awesome.

Cheers

 

[Stihlbillie]

http://m.ebay.com/itm/46mm-CYLINDER...%3A463aceaa15e0a866e41e03c3fffaf5d6%7Ciid%3A2

 

[Modifiedmark]

http://m.ebay.com/itm/46mm-CYLINDER-PISTON-KIT-FOR-HUSQVARNA-50-51-55-CHAINSAW-RINGS-CLIPS-PIN-REBUILD-/222616962597?epid=2185081714&hash=item33d5014625:g:IHoAAOSwXCNZk9ka&_trkparms=pageci%3A6caef330-9069-11e7-ab6d-74dbd1805f9b%7Cparentrq%3A463aceaa15e0a866e41e03c3fffaf5d6%7Ciid%3A2

Chinese garbage and 46mm which probably won't fit a 50 anyway. A black top 89 model has a smaller cyl case opening then the latter 50 special, 51 and 55

 

[raumati01]

I've got a heap of parts for those saws, will have.a look for you

 

[aokpops]

metor from Itlay get rid of the base gasket a nice little torque monster

 

[Stihlbillie]

Chinese garbage and 46mm which probably won't fit a 50 anyway. A black top 89 model has a smaller cyl case opening then the latter 50 special, 51 and 55

Chinese cylinder for a chinese saw