jacrawley
ArboristSite Member
A friend gave me a husky that runs fine when cold then gets leaner and leaner as it warms up. The only way it will idle is with the idle screw turned all the way in. I replaced the carb with the same results. I have pressure tested it and don't see any bubbles. Not sure how I could pressure test when it's hot but that seems like what I need to do.
The saw was purchased used from a guy who put a new top end on it.
Anything obvious I should look at? Base gasket maybe?
Thanks
The saw was purchased used from a guy who put a new top end on it.
Anything obvious I should look at? Base gasket maybe?
Thanks