FullCry
ArboristSite Operative
I have a Stihl 025 that I acquired. I don't know the year it was made but it still has a bar code on the front of the case. Anyway when I got it you can make a cut and when you let off the throttle it would stall. Only the low screw is adjustable for the high side has a plug in it. I tried every position from 1 1/2 out and both sides of this. It doesn't do this on every cut but often though. If i rev the saw after the cut a few times a lot of the time it won't cut off.
I removed the carb and cleaned it out and had thoughts of somehow removing the high side plug but didn't try. I ran the saw and adjusted the carb and made some cuts and it's still doing the same thing. I blew air through every jet after I soaked it.If anyone has ever seen this type problem I would be grateful for the knowledge and help. Thanks, FullCry
I removed the carb and cleaned it out and had thoughts of somehow removing the high side plug but didn't try. I ran the saw and adjusted the carb and made some cuts and it's still doing the same thing. I blew air through every jet after I soaked it.If anyone has ever seen this type problem I would be grateful for the knowledge and help. Thanks, FullCry