Jonsered 2094 flooding

[yellowking86]

Hi I am having some trouble with my 2094 flooding (fuel comes out muffler). I rebuilt the carb still floods out a new oem carb on it still floods checked the metering it was correct even lowered it still floods turned the h and l all the way in still floods. If I take the fuel line off it fires right up and dies. Anyone have any suggestions I need some help. Picture is of a 2095 I just bought this weekend how does it compare to the 2094?

 

[Bubster]

Have you tried loosening the fuel cap and running the saw on its side? 2094 and 2095 were basically the same I do believe. Dang nice saws you have there.

 

[yellowking86]

Have you tried loosening the fuel cap and running the saw on its side? 2094 and 2095 were basically the same I do believe. Dang nice saws you have there.

I haven’t tried that I’ll give it a shot, thank you

 

[Farmer_Nate]

Did you pay careful attention to how the parts go back into the carb? Have a diagram?

You could be on the right track with metering lever setting for proper metering needle operation.

Another aspect is spark, or spark at the correct times.
I had an old saw which seemed to flood, but really had to do with inadequate spark. Try a new plug?
Coils can cause this also.