Want to Buy Kolve chain tie straps??

[redoakneck]

I have access to some 3/8" pitch, .058 gauge kolve chain.


Can't find tie straps to make loops

Anyone know where to find a couple sets???

Philbert??

Pete

 

[Philbert]

Philbert??

I only have a few short scraps of Kolve chain. No special presets or tie straps.

Have you tried to fit an Oregon preset? Measure the thickness of the drive links on your chain (there were several different models). Most Oregon pre-sets are .058.

Philbert

 

[redoakneck]

I have one made with Oregon, rivets didn't match well but it works.

Just trying to find OEM if possible

 

[astnmacgto]

I have one made with Oregon, rivets didn't match well but it works.

Just trying to find OEM if possible

I understand this is an old thread but I just got a bunch of new tie straps, cutters, and the butterfly looking teeth. On the off chance you still need some let me know.
ADLM

 

[redoakneck]

I understand this is an old thread but I just got a bunch of new tie straps, cutters, and the butterfly looking teeth. On the off chance you still need some let me know.
ADLM

Wow, yes, I will pm you today,

Thanks

 

[astnmacgto]

Let me go home tonight after work and confirm that they are .375 .058 but It is supposed to be
ADLM

 

[redoakneck]

Let me go home tonight after work and confirm that they are .375 .058 but It is supposed to be
ADLM

Sounds great, really appreciate that!!

 

[astnmacgto]

Are you only needing tie straps to put loops together because I have plenty of tie straps and I also have .058ga left and right wing teeth, drivers, left and right raker teeth as well let me know how many you need
ADLM

 

[astnmacgto]

Picking through all the goodies
ADLM

 

[Bill G]

If you have the chain reuse the tie straps and go to work
There is little to no side load