jimabbey
ArboristSite Lurker
The blower motor on our insert is burnt out as a reslut of an electrical spike caused by a faulty generator. I have been unable to find a replacement motor from any of the local electrical outlets. The motor drives a cigar shaped drum fan located at the bottom of the unit. Does anyone have a supplier?
As well this is a catalytic unit with ceramic inserts about 3 inches square. At one site I visited it suggested that these can become inefficient and should be replaced. I was of the opinion that these were ceramic and only needed to be free of dust etc to be efficient.
I am open to any advice and suggestions.
We use the unit in our livingroom / family room and it supplies better than 60% of the heat in the house. I have the forced air furnace on continuous blower to help circulate the heat. We really rely on the inset and need some help and advice fast.
Hope you have a good lead.
As well this is a catalytic unit with ceramic inserts about 3 inches square. At one site I visited it suggested that these can become inefficient and should be replaced. I was of the opinion that these were ceramic and only needed to be free of dust etc to be efficient.
I am open to any advice and suggestions.
We use the unit in our livingroom / family room and it supplies better than 60% of the heat in the house. I have the forced air furnace on continuous blower to help circulate the heat. We really rely on the inset and need some help and advice fast.
Hope you have a good lead.