Look at the meat on this girls bones

[elanjoe]

well I went in for a muff mod and base gasket removal ended up doing what I said I wasnt going to do, just minor port work to the bottom of the transfers. nothing major. and I matched the exhaust port to the muffler, thats all. this was a low hour unit. I had not even put 10 minutes on it before I modded it. looks like the previous owner didnt have much more than that on it either.

 

[elanjoe]

 

[elanjoe]

photo bucket is being stupid.

 

[elanjoe]

the ports are alot smoother in person.

 

[elanjoe]

 

[moody]

Cut the transfers to match the case. Stumpy had me try that on my 61/272 and saw some good results.

 

[elanjoe]

family portrait



sure feels like I made a difference. has anyone ever played with ignition timing on these ?

 

[elanjoe]

Cut the transfers to match the case. Stumpy had me try that on my 61/272 and saw some good results.

worked out nicely, the residual gas/oil marked where the case still had room for transfers, ended up being Quite a bit.

 

[elanjoe]

 

[moody]

worked out nicely, the residual gas/oil marked where the case still had room for transfers, ended up being Quite a bit.

Yeah I cut mine flush with the base worked out really well. I'm doing some adjustments on intake and exhaust ports. I have some room left for improvement. Nice looking project you have going here. Be sure to make a video for us

 

[elanjoe]

Yeah I cut mine flush with the base worked out really well. I'm doing some adjustments on intake and exhaust ports. I have some room left for improvement. Nice looking project you have going here. Be sure to make a video for us

I will do that, maybe a 630 vs 2165 showdown.

 

[moody]

I will do that, maybe a 630 vs 2165 showdown.

One more thing then I'll leave ya to it. You suck! That saw hasn't been run much

 

[elanjoe]

One more thing then I'll leave ya to it. You suck! That saw hasn't been run much

It blows my mind when you take into consideration that this saw was made in 2000

 

[elanjoe]

this is what I cut on all four transfers

 

[elanjoe]

should a muff modded 039 be faster ?

 

[WKEND LUMBERJAK]

should a muff modded 039 be faster ?

If it is you messed up terribly.

 

[elanjoe]

If it is you messed up terribly.

:mad2::mad2: uh oh.

 

[WKEND LUMBERJAK]

:mad2::mad2: uh oh.

Did you open up the muffler to take advantage of the porting you did

 

[elanjoe]

Did you open up the muffler to take advantage of the porting you did

yeah, its in one of the pics. and I was joking on the 039 , she flys by her.

 

[WKEND LUMBERJAK]

yeah, its in one of the pics. and I was joking on the 039 , she flys by her.

It should smoke it stock you had me worried. Missed that picture.