Mastermind
Work Saw Specialist
I ported this saw for a member in NY........after a few hours of run time, it developed the dreaded 562 bog. ![Frown :( :(](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
He was ready to pitch it under a skidder, but instead he traded it to me on a 346XP I had. I ran the saw for about an hour one day.....and sure enough......the bog was there, and most annoying.
I bought a new EL44 for the saw from TK and fitted it with the module from the EL46. I also shimmed the pickup on the throttle position sensor (TPS) out a little. That makes the TPS get a cleaner signal.
I've ran the saw for about half a tank since the new carb was installed.......and the bog is gone.
Total run time on this unit is less than 7 hours.
Now someone had been asking me about this saw.......but I get so many PMs......well, I can't recall who it was.
At any rate.......I wanna sell it.![Laugh :laugh: :laugh:](/styles/default/xenforo/laughing.gif)
Never a shelf queen......this saw has a few blemishes.
The silver never fairs well on these things.....
The muffler has been modded with one of Jon's custom deflectors.....and is still screened.
Yeah.....it's a flippy cap saw.
The squish has been cut .030", and the base cut .007". It is not running a base gasket.
No chain rash....but no super cleanup either. Just blown off with an air hose.
I got some smaller stickers just for these saws.![Smile :) :)](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
Price? $750.00 shipped.
He was ready to pitch it under a skidder, but instead he traded it to me on a 346XP I had. I ran the saw for about an hour one day.....and sure enough......the bog was there, and most annoying.
I bought a new EL44 for the saw from TK and fitted it with the module from the EL46. I also shimmed the pickup on the throttle position sensor (TPS) out a little. That makes the TPS get a cleaner signal.
I've ran the saw for about half a tank since the new carb was installed.......and the bog is gone.
Total run time on this unit is less than 7 hours.
Now someone had been asking me about this saw.......but I get so many PMs......well, I can't recall who it was.
At any rate.......I wanna sell it.
![Laugh :laugh: :laugh:](/styles/default/xenforo/laughing.gif)
Never a shelf queen......this saw has a few blemishes.
![](https://proxy.imagearchive.com/e6c/e6c5e7e5e82750a41bf6eb2a257a6723.jpg)
![](https://proxy.imagearchive.com/1f2/1f201c8eaa8760d2147ba7a7e6776e59.jpg)
The silver never fairs well on these things.....
![](https://proxy.imagearchive.com/978/978c2c29a9eabbac4bdc6fd28115b1e5.jpg)
The muffler has been modded with one of Jon's custom deflectors.....and is still screened.
![](https://proxy.imagearchive.com/ef6/ef6281be741106f19eb4c49f2905218b.jpg)
Yeah.....it's a flippy cap saw.
![](https://proxy.imagearchive.com/6b3/6b3b10c9f0b264ffecca05347074b4f8.jpg)
The squish has been cut .030", and the base cut .007". It is not running a base gasket.
![](https://proxy.imagearchive.com/6ff/6ff61e29ac62b05c57ac4d7f4501258e.jpg)
No chain rash....but no super cleanup either. Just blown off with an air hose.
![](https://proxy.imagearchive.com/f70/f7022f414c4396a0ad26719bb2dde057.jpg)
![](https://proxy.imagearchive.com/6d8/6d897d34e9911c1a6c3de66538da7194.jpg)
I got some smaller stickers just for these saws.
![](https://proxy.imagearchive.com/6ec/6ecdcc76f68d25b55c82839a22451a70.jpg)
Price? $750.00 shipped.