McCulloch Chain Saws

[Mr. Bow Saw]

Is that an old sprocket for a muffler on the 15? a nice touch!

Yes, the outer half is. Its a Stihl S-10 rim sprocket.

 

[OldDeadWood]

Hello Everyone.

I just found my way back on to AS after a week to ten days of trying.

This new setup is wierd so it will take this old guy some time to relearn whats up.

I,m glad to see the system is back up.

ODW

I just noticed I'm a new member.

 

[svk]

Mac 1-10 2-10 (obviously!) 3-10,4-10, 5-10, 6-10, 7-10 100%. here are three in just the first page on ebay. personally I like the reed style mufflers. they give I nice pop at idle! the last link is a reed style.
http://www.ebay.com/itm/MCCULLOCH-2...705?pt=LH_DefaultDomain_0&hash=item3a87029989

http://www.ebay.com/itm/MCCULLOCH-1...638?pt=LH_DefaultDomain_0&hash=item35b40a1e1e

http://www.ebay.com/itm/McCulloch-S...212?pt=LH_DefaultDomain_0&hash=item27d6ec55bc

Thanks Mac 6-10!

 

[watsonr]

Any reason to have a saw with both right and left hand starters mounted to the saw at the same time.. here's the first ever I've seen. MAYBE since its such a big saw and extremely high compression you'd need both hands? Would/could you use both hands at the same time, not that I would want to... what if the beast actually starts... cut your foot off. Lately these things are falling out of the sky every other day! But hey, its be an on-board spare in case one rope broke.

http://www.ebay.com/itm/261323740916?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2648

 

[mad murdock]

That is the ambidextrious option maybe?? a dealer installed option

 

[joeymt33]

I've seen several 10-series saws like that. Looks like extra weight to me.

 

[heimannm]

Dual spikes, why not dual starters?

I like the RH starter as long as I have log to lay the saw over when starting. LH starter is definitely easier to operate when starting the saw on the ground. I don't even think about drop starting a big saw anymore, anything bigger than a healthy 7-10 is out of the question for me.

Mark

 

[watsonr]

Starting a saw by drop starting is a foolish and easy way to cut your self badly in my opinion. Not saying that I haven't done it, but as I become older, I realize how easy it for the saw to get away from me and more than once, had the bar slap my leg when it jerked the rope out of my hand. If the saw had started, especially these older saws, probably would have hurt me.

I've yet had that happen when starting from the ground with a foot firmly planted in the stirrup and any saw.

 

[Warped5]

 

[heimannm]

895?

 

[Warped5]

895?

Yessir! A generous AS member out in the NorthEast fetched/sent it.

I was trying to stave off a Red attack.

 

[ozflea]

McCulloch in the eighties started using a boot loop especially on there pro saws only problem no good if you had big feet

 

[Warped5]

McCulloch in the eighties started using a boot loop especially on there pro saws only problem no good if you had big feet

Hey! Bob's here! Good to see your technical problems are straightened away!

 

[ozflea]

I've been trying for days must still be a few problems with passwords

 

[ozflea]

I have a Pro Mac 5600 ? Dolmar on its way





McBob

 

[sawbones]

Mc Binford 4200 and Heidi

 

[Eccentric]

Don't remember seeing that. I didn't watch that show very often however. That's a Double Eagle 80.

 

[OldDeadWood]

It seems like "Page 1100" is some kind of a milestone.

ODW

 

[joeymt33]

Don't remember seeing that. I didn't watch that show very often however. That's a Double Eagle 80.

Is it a double eagle or a PM8200? I really don't know. It just looks gray to me instead of black. It could be the light though.

 

[rwoods]

Whatever it is Tim had good tastes. Ron