McCulloch Mac Cat

[Butch1957]

On this McCulloch Mac Cat Chain Saw, where is the Carburetor Throttle cable / linkage ? I came across this saw but there is not one to be seen. Am I missing something ?

Thanks.

A part number would be handy if there is one available. Number off the saw : 60016002
11-130918

 

[retoocs555]

It's a cable housed in a black plastic sheathing. It comes into the compartment where the carb is through side towards the back. Do you at least see a hole where the cable should be?

 

[Butch1957]

McCulloch Mac Cat Chain Saw

It must go backwards through the handle and down to the carby. There is a slot for it. What part number do you carry for it ?

Thanks.

 

[retoocs555]

It must go backwards through the handle and down to the carby. There is a slot for it. What part number do you carry for it ?

Thanks.

Yup, through the handle and down to the carb.

I don't have the Mcculloch IPL for that saw so I don't know the part number. But I do have several mac cat parts saws with good cables if you need one PM me.

 

[Butch1957]

I sure could use that cable. Just let me know how much. My address is:

Melvin Cribb
18 W. 19th. St.
San Angelo, Texas 76903
[email protected]

Thanks.