MuleyJ
Addicted to ArboristSite
OK, I tried it again. Took a new 28" bar and brand new 28" Stihl RSC chain to do these. These are the fist six cuts for both. All saws are same B/C and 7 pin rim. Same round as yesterday. The 660 is tuned WOT at 13,100, 064 the same as before at 13,000 and I leaned the 372 out to 14,700. No 7900 this time cause I don't know if the Husky spacer will work and I did not have time anyway. The 660 has a DP muffler but the single outlet on the 064 is probably bigger than the total area of the DP. Don't hold anything back this time guys, I can take it!
<object width="480" height="385"><param name="movie" value="http://www.youtube.com/v/fhiJzAur9ZQ&hl=en_US&fs=1&"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/fhiJzAur9ZQ&hl=en_US&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object>
Times from the vid editor:
660 1} 21.43
660 2} 21.27
064 1} 21.70
064 2} 22.47
372 1} 21.00
372 2} 22.00
Some things I learned. Maybe I'm just trying to console myself, but I don't think this chain is as sharp as the Oregon chain I filed with a Granberg. If you look at the chips there is more fine stuff in them and they are not as big as in the other vids? Either I leaned out the 372 too much or it does not pull the 28" bar quite as well or both. I was a little prouder of my 372 yesterday than I am today
<object width="480" height="385"><param name="movie" value="http://www.youtube.com/v/fhiJzAur9ZQ&hl=en_US&fs=1&"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/fhiJzAur9ZQ&hl=en_US&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object>
Times from the vid editor:
660 1} 21.43
660 2} 21.27
064 1} 21.70
064 2} 22.47
372 1} 21.00
372 2} 22.00
Some things I learned. Maybe I'm just trying to console myself, but I don't think this chain is as sharp as the Oregon chain I filed with a Granberg. If you look at the chips there is more fine stuff in them and they are not as big as in the other vids? Either I leaned out the 372 too much or it does not pull the 28" bar quite as well or both. I was a little prouder of my 372 yesterday than I am today
Last edited: