Sawyer Rob
Addicted to ArboristSite
So i loaded a big white pine on the mill and leveled it up a bit with the "toe boards",
the log had big bumps on it, so i had to make a cut and then turn it just so the head rig would clear. Once that was done, i turned the log again...
then i took a slab off, and turned the log again,
and took another slab off!
My friend also needed some 5/4 boards, so i took some 5/4 boards off to get to the 12" wide cant that i needed to make the 2x12's,
"finally" i turned it one last time and took the last slab off!
the log had big bumps on it, so i had to make a cut and then turn it just so the head rig would clear. Once that was done, i turned the log again...
then i took a slab off, and turned the log again,
and took another slab off!
My friend also needed some 5/4 boards, so i took some 5/4 boards off to get to the 12" wide cant that i needed to make the 2x12's,
"finally" i turned it one last time and took the last slab off!