News about the 560XP

[Boskaerm]

Here is a press release from Husky, maybe some of you have seen it before!

On the Danish site the 562XP is also presented! As a saw with larger air filter, and larger bar.

Experience chainsaw performance at new, unparalleled heights

And the Danish version

Innovation i kædesave introducerer to unikke Husqvarna-maskiner

 

[SawTroll]

That is the same as the ones I linked up from the Canadian site a while ago, in another thread.

 

[Boskaerm]

sorry.. didn´t notice that, but check the Danish site! Maybe you haven´t seen that one!

 

[SawTroll]

sorry.. didn´t notice that, but check the Danish site! Maybe you haven´t seen that one!

Nothing to be sorry about at all! :msp_smile:

The Danish one is the same as one of the Canadian ones - just in a different lingo. :msp_wink:

 

[Boskaerm]

Nothing to be sorry about at all! :msp_smile:

The Danish one is the same as one of the Canadian ones - just in a different lingo. :msp_wink:

Just seemed to me, that the 562xp, wasn't mentioned, or shown no the canadian site?

 

[masculator]

who cares they are just sewing machines with a chainsaw bar on them....lol just kidding and reffering to the argument about canadian and danish sites

I am sorry but as far as build goes they still run second to me. to a privately owned company that produces quality goods which are finished better and thought out more.

 

[ChrisF]

to a privately owned company that produces quality goods which are finished better and thought out more.

Blablablablabla

 

[masculator]

Blablablablabla

See their supporters can only speak jibberish....lol

Just kidding they actually look like husky have had a go with these new ones instead of looking like the plastics were moulded off dies made in the early seventies.

 

[w8ye]

Do you think the introduction of the 560XP means the end of the 357XP production?

 

[SawTroll]

Just seemed to me, that the 562xp, wasn't mentioned, or shown no the canadian site?

There is one about both, and one about only the 560xp, both dated the same day. :msp_smile:

 

[teatersroad]

The Danish one is the same as one of the Canadian ones - just in a different lingo. :msp_wink:

.. and maybe preffered by those here that don't speak Canadian.

 

[SawTroll]

.. and maybe preffered by those here that don't speak Canadian.

:hmm3grin2orange::hmm3grin2orange: Doesn't matter much to me, as long as Canadian isn't French!

 

[SawTroll]

Do you think the introduction of the 560XP means the end of the 357XP production?

I assume it does, in this case.....

 

[masculator]

I am not sold on the chain break/ hand guard, It looks weak and flimsy to me.

 

[sunfish]

I am not sold on the chain break/ hand guard, It looks weak and flimsy to me.

Looks fine to me...:msp_smile:

 

[ChrisF]

Looks fine to me...:msp_smile:

Same here, I fail to see the issue with it. Someone should lose their creamsicle goggles, and fast.

 

[sunfish]

Same here, I fail to see the issue with it. Someone should lose their creamsicle goggles, and fast.

Some just like to take a jab at Husky. :msp_wink:

 

[nhlogga]

Do you think the introduction of the 560XP means the end of the 357XP production?

Yes. The 560/562 will replace the 359/357,

 

[dingeryote]

Yes. The 560/562 will replace the 359/357,

Maybe.
But it will take a while, and still linger on in other markets, that don't have econazi freaks stepping on thier throats.

The 357 isn't slated to be dumped for a while, and the Cat strangled 359 fills the gap in the intermediate line too well.
The return on tooling made already, means the line is pure Gravy for Husky in the future.
It's gonna be a while.

Stay safe!
Dingeryote

 

[SawTroll]

Maybe.
But it will take a while, and still linger on in other markets, that don't have econazi freaks stepping on thier throats.

The 357 isn't slated to be dumped for a while, and the Cat strangled 359 fills the gap in the intermediate line too well.
The return on tooling made already, means the line is pure Gravy for Husky in the future.
It's gonna be a while.

Stay safe!

Dingeryote

I am not so sure that they will in this case in this case - time will tell! :msp_wink: