Nik's Poulan Thread

[s sidewall]

unless at 245 a bow on it then you may have to go with that.

Steve Sidwell, Samsung On5 using Tapatalk

 

[s sidewall]

Unless they r saling cheap.

Steve Sidwell, Samsung On5 using Tapatalk

 

[brandonstc6]

unless at 245 a bow on it then you may have to go with that.

Steve Sidwell, Samsung On5 using Tapatalk

The 245 is part of the $135 deal.


Sent from my iPhone using Tapatalk

 

[s sidewall]

That right, well then go for it.

Steve Sidwell, Samsung On5 using Tapatalk

 

[s sidewall]

Sorry Acorn, trying to help ya sale your saw.

Steve Sidwell, Samsung On5 using Tapatalk

 

[s sidewall]

Around 74cc on the 245a.

Steve Sidwell, Samsung On5 using Tapatalk

 

[RedneckChainsawRepair]

If I remember correctly.

Had to take a 2nd look to make sure that was you. Now you need to change that username to 7910WOODCHUCK.

 

[RedneckChainsawRepair]

Just picked this up today after a drive in Ohio. My 3rd 54cc of this model craftsman 3.3 with chrome bore.

Bought it for parts. But bet I get it running. Last guy couldnt get it started.

Good thing the air filter was doing its job.
Pics as it was handed to me.

 

[s sidewall]

Lightly used I say, nice find.

Steve Sidwell, Samsung On5 using Tapatalk

 

[s sidewall]

My 5200 starting to come together.

Steve Sidwell, Samsung On5 using Tapatalk

 

[s sidewall]

What I removed from my 5200 on the left and SKF 6904 on the right. Sure that SKF will work in a 5200?

Steve Sidwell, Samsung On5 using Tapatalk

 

[PogoInTheWoods]

Doesn't even look close to me.

 

[s sidewall]

Same thoughts.

Steve Sidwell, Samsung On5 using Tapatalk

 

[PogoInTheWoods]

Just picked this up today after a drive in Ohio. My 3rd 54cc of this model craftsman 3.3 with chrome bore.

Need to put a bar and chain on mine one of these days.

 

[PogoInTheWoods]

This is supposed to be a SKF 6904 seal....

​

 

[PogoInTheWoods]

So is this...

​

 

[s sidewall]

This is what I got.

Steve Sidwell, Samsung On5 using Tapatalk

 

[s sidewall]

So, which is right, both 6904.

Steve Sidwell, Samsung On5 using Tapatalk

 

[PogoInTheWoods]

Something is obviously amiss. Both claim 5/8" shaft size.

 

[Hoggwood]

I have a pair of NOS 530019075 seals here.

ID = 0.625"
OD = 1.129"
Width = 0.1875"

The SKF's are listed at 1.124" OD and the width is 0.25". http://www2.chicago-rawhide.com/popup_parts_lookup_457010.htm

I may have heard from another member there being an issue with fitment on those 6904.

What do those 6904's mic out at??