ziggo_2
ArboristSite Operative
Could anybody take a picture or/and measure how long the chain on the bi metal draft should be when the furnance is cold, I think i screwed it up.
Its under the red cover on feed door if you didnt already know, 5/16 nut driver should do it.
Id normally go to menards and just start taking their other ones apart, but I dont feel like driving that far in all the snow were getting.
Thanks
Its under the red cover on feed door if you didnt already know, 5/16 nut driver should do it.
Id normally go to menards and just start taking their other ones apart, but I dont feel like driving that far in all the snow were getting.
Thanks