Want to Sell NOS Bars for Stihl, Husqvarna, Echo, John Deere, + milling chain

[Brushwacker]

Still have more bars then I need and I need funds. I am offering chain loops with the bars for convenience and not looking to sell the chains without a bar as of now. Same with sprockets I have.
#1 Someone buy the nice 20" 3/8 .050 NOS large mount Husqvarna bar on top, it is an GB Austraila titanium bar painted for Husky OEM $45.00
#2 NOS Stihl OEM ROLLOMATIC E 3003 mount, 026 through ms660, 20" 3/8 .050 Some faint scratches but unused. $39.00
#3 D025 For Stihl 026 to ms660 Oregon Power Match 20" 3/8 .050 NOS few tiny scratches but nice and unused $40.00
#4 D025 Fits " " " " Oregon PRO LITE 18" .325 .063 NOS Faint scratches and scuffs and faint streaks of light surface rust on paint. Sprocket turns smooth and clean. $32.00
#5 is an ArborPro Laminate made in Taiwan.For Stihl 026 to ms660 16" 3/8 .050 New Condition $20.00
Chains with a bar 3/8: 20" Woodland Pro Semi Chisel $15.00 or Oregon Full Chisel $17.00
For 18" .325 Stihl RM or RMC3 $21.00 or Windsor Semi chisel $15.00
For 16" 3/8 Stihl RMC $17.00
Have a few spur sprockets and rims for various models, see pic, prices will vary.
More coming...

 

[Brushwacker]

Here is the Echo- John Deere bars ( fit older models like 602 EVL, 650 and 660, JD 60 or 70V , and many more.) I think 1 or 2 of these may have the slot to work on McCulloch. If not I have a NOS 16" OEM Mcculloch bar also .
All are 16" 3/8 60dl, 3 are NOS, 1 good used is the same as the new Oregon sprocket nose with the exception of the shape of the replacable nose.
Windsor or black OEM Echo bars $20.00 each
NOS Oregon sprocketnose $25.00
Used Oregon sprocket nose $10.00
More Stihl mount bars coming up...

 

[Brushwacker]

1, D025 mount for 026 to ms661, NOS 24" 3/8 .050 Oregon Powermatch. A bit of light paint chipping and scratches from shelf life. Everything feels nice and smooth and still looks good for a work saw. $45.00
1, NOS ArborPro Laminate D025 mount for 026 to ms661, NOS 24" 3/8 .050, A touch of surface rust on the rivets. I have another 1 of these in Husky large mount and black paint. $32 each
I have 24" Woodland Pro Semi chisel and 1 full chisel to go with bars at $15 each.
Also have 1 of each partial 25' reels of milling chain either 3/8 .050 or .058. Will price reasonable if interested.
1, 12" .043 Picco bar and Woodland Pro semi chisel chain combo $38.00 ( I have 3 or so of these combo's for sale ).
Have a few small mount Echo bars hanging out aiming to add here at a later time, ask if interested sooner.
Shipping cost to be added on all my prices.

 

[Brushwacker]

3/8 milling-ripping chain;
.050 gauge: 218 drive links remain ( 25 foot = 410)
$40.00 + shipping for the 218 drive links + 3 connector links.
.058 gauge 18 foot, + 5 connecter links ( will double check measurement if interested ) $55.00
If you want it on the real shipping will be higher. Cheapest and simplest to pack loose chain in a small flat rate box for $6ish for 1 partial reel in the U.S.. I would sell loops for .75 per bar inch ( example a 20" bar chain would be 20 x $.75 = $15.00 ) .
I don't get much use for Echo - JD bars so if any one takes 2, I will drop $5.00

 

[Whitty21]

#2 NOS Stihl OEM ROLLOMATIC E 3003 mount, 026 through ms660, 20" 3/8 .050 Some faint scratches but unused. $39.00

Price shipped to L0L 1T0 Canada?

 

[marti384]

What brand is the milling chain. I am interested in the .050

 

[Brushwacker]

What brand is the milling chain. I am interested in the .050

The box is labeled GB, but it is Carlton chain.
218 drive links remain ( 25 foot = 410)
$40 + shipping for the 218 drive links + 3 connector links. If you want it on the real in the original box I think shipping will be higher. Cheapest and simplest to pack loose chain in a small flat rate box for $6ish.

 

[marti384]

PM sent

 

[Brushwacker]

#2 NOS Stihl OEM ROLLOMATIC E 3003 mount, 026 through ms660, 20" 3/8 .050 Some faint scratches but unused. $39.00

Price shipped to L0L 1T0 Canada?

I'll try again later. International shipping calculator was down for some reason.

 

[Brushwacker]

3/8 milling-ripping chain;
.050 gauge: 218 drive links remain ( 25 foot = 410)
$40.00 + shipping for the 218 drive links + 3 connector links.
.058 gauge 18 foot, + 5 connecter links ( will double check measurement if interested ) $55.00
If you want it on the real shipping will be higher. Cheapest and simplest to pack loose chain in a small flat rate box for $6ish for 1 partial reel in the U.S.. I would sell loops for .75 per bar inch ( example a 20" bar chain would be 20 x $.75 = $15.00 ) .
I don't get much use for Echo - JD bars so if any one takes 2, I will drop $5.00

.050 milling -ripping chain sold

I counted the links of the .058 and re measured. 288 links possibly 290 + 5 connecters ( 2 counts ) just shy of 18 foot. I would do $55 shipped loose in a small flat rate box in the U.S..

 

[cedarhollow]

Will that 20" 3/8 050 bar fit a stock ms 360? do you have aloop of chain that will fit too? if so I am interested? Forgive my ignorance I am newby trying to learn bout it all
thanks, bruce

 

[Brushwacker]

Will that 20" 3/8 050 bar fit a stock ms 360? do you have aloop of chain that will fit too? if so I am interested? Forgive my ignorance I am newby trying to learn bout it all
thanks, bruce

Yes and yes. Still have the OEM Stihl Rollomatic for $39. and the Oregon PowerMatch with a replaceable sprocket nose for $40. I have an Oregon full chisel chain for $17. If you rather have semi chisel I'd have to do some lookin as I sold all from my supply box. Might have 1 in 1 of my trucks. I expect shipping would be 10 to $15. PM me your town and zip if u want me to check.

 

[Brushwacker]

#2 NOS Stihl OEM ROLLOMATIC E 3003 mount, 026 through ms660, 20" 3/8 .050 Some faint scratches but unused. $39.00

Price shipped to L0L 1T0 Canada?

Looks like $22 UPS or +50 U.S. postal service, sound right ?

 

[Brushwacker]

Update what is left for sale:
1, D025 mount for Stihl 026 to ms661, NOS 24" 3/8 .050 Oregon Powermatch. A bit of light paint chipping and scratches from shelf life. Everything feels nice and smooth and still looks good for a work saw. Since this is my last 1 of these and I have a couple chains more then I need I am pricing it as 1 bar and 2 Woodland pro chain combo for $75. (either 2 semi chisel or 1 and 1 full chisel)

#3 D025 For Stihl 026 to ms660 Oregon Power Match 20" 3/8 .050 NOS few tiny scratches but nice and unused $40.00

#4 D025 Fits " " " " Oregon PRO LITE 18" .325 .063 NOS Faint scratches and scuffs and faint streaks of light surface rust on paint. Sprocket turns smooth and clean. $32.00 reduced to $29

1, Stihl OEM 12" .043 Picco bar and Woodland Pro semi chisel chain combo $38.00 reduced to $35. ( I have 3 or so of these combo's for sale ).
Have a few small mount Echo bars and Husqvarna 3/8 lo pro hanging around aiming to add here at a later time, ask if interested sooner.
The 4 16" Echo mount +., (larger saws) are still available (also are listed on ebay), have 16" 60dl Stihl RM chains to go with them $17..
3/8 .05 20" Oregon Full Chisel $17.00
For 18" .325 Stihl RM or RMC3 $21.00 reduced to $19. or Windsor Semi chisel $15.00
Have a few spur sprockets and rims for various models, see pic, prices will vary.
. 058 milling-ripping chain is still available ( also on ebay)
Reminder I am offering the chains and sprockets to be sold with a bar at these prices to make it convenient to replace all at once if I have all u need. Not aiming to sell a sprocket or chain individually.
Shipping cost to be added on all my prices.