nilzlofgren Addicted to ArboristSite Joined Feb 28, 2006 Messages 1,095 Reaction score 126 Location Mullica Twp. New Jersey Feb 27, 2007 #1 Are the pins that hold the sprocket into the nose of the bar, just pushed in and out? Can I just use a drift or punch, or is it ground out like the rivets in the chain?
Are the pins that hold the sprocket into the nose of the bar, just pushed in and out? Can I just use a drift or punch, or is it ground out like the rivets in the chain?
oldsaw "Been There, Milled That" Joined Jul 26, 2004 Messages 19,494 Reaction score 2,660 Location The Land of Fish and Roses Feb 27, 2007 #2 Center punch them, drill them, then drive them out. The rivet is far softer than the bar, but you still need to pay some attention. Mark
Center punch them, drill them, then drive them out. The rivet is far softer than the bar, but you still need to pay some attention. Mark