offset woodruff keys?

[spladle160]

Does anyone know of a source for offset 2x3.7 woodruff keys? I sheared off the one I had cut down for the 660 I'm building this evening and was wondering if there was a better way than cutting them down. It broke due to the flywheel not being anywhere close to as snug as I thought, not due to being cut down.

 

[Chris-PA]

Try McMaster-Carr: http://www.mcmaster.com/#woodruff-keys/=waqbg9

 

[spladle160]

No luck on McMaster for even the standard non offset key.

 

[Chris-PA]

No luck on McMaster for even the standard non offset key.

I missed the offset part - they do have a 2 x 3.7 standard key though.

 

[spladle160]

You're right, don't know how I looked past it. Don't think I need 25 for McMaster prices and shipping but will post the link for anyone looking for standard keys in a hurry on the future.http://www.mcmaster.com/#98490a130/=waqya4

 

[bulletpruf]

Bump - anyone know of a manufacturer for an offset key? I found some using a search but none in the correct size of 2x3.7.

 

[KASH]

Those keys would be handy.
Kash