You guys are the best!
Anything on the horizon as far as Charity Cuts go like the ones we had in the past?
Oklahoma,AR,MO,KS,TX GTG (Next GTG 08/27/2016 ) Fort Scott, KS
- Thread starter Work Saw Collector
- Start date
Help Support Arborist Forum:
Anything on the horizon as far as Charity Cuts go like the ones we had in the past?
Evening gents!
After some careful consideration, I've solely decided to remove the 'bull stomping on me' from my list of injuries. It's been almost a month, and it hardly hurts anymore. What's more, sometimes when I'm walking, (ok, hobbling...) along I forget that it even happened..
Or is that senility?
After some careful consideration, I've solely decided to remove the 'bull stomping on me' from my list of injuries. It's been almost a month, and it hardly hurts anymore. What's more, sometimes when I'm walking, (ok, hobbling...) along I forget that it even happened..
Or is that senility?
Old injuries have come back to haunt one. I've resigned myself to just put up with it.[emoji20]
WKEND LUMBERJAK
Addicted to ArboristSite
Good morning Carl . Dan hows the family? Have Balmy 54 
here this morning
here this morning
Homelite410
Hack with a CNC Mill
Matt...... Talk to Chet about the 7.3. Tranny first!
jetmd
ArboristSite Operative
Better yet Matt just take my truck out and thrash on it. See if you likey 
jetmd
ArboristSite Operative
Morning Mike!
Hedgerow
HACK
First before what?
Hedgerow
HACK
Oh I'm sure I would..Better yet Matt just take my truck out and thrash on it. See if you likey
That's a slick rig..
Mine is just an old farm truck.
I can cruise the state roads at 1400 rpm's. Seems once it shifts into OD, it'll hang there unless you really romp on it.
Homelite410
Hack with a CNC Mill
I bet there is a hack to allow you to lock the converter in any gear. I could in my 98 12V dodge.
Morning midlanders!
Another beautiful day in the neighborhood!
August what????
Another beautiful day in the neighborhood!
August what????
SteveSS
Addicted to ArboristSite
Morning gents. Have a good one.
Hi Steve X 2!
Friend Allen was by and sent a couple machine shop projects along with him. One for the Remy gear drive and one for the big Deere/Echo.
Hope to get the SL-5R done for Ft Scott.
Friend Allen was by and sent a couple machine shop projects along with him. One for the Remy gear drive and one for the big Deere/Echo.
Hope to get the SL-5R done for Ft Scott.
I heard from Ed there is supposed to be a place around Halltown doing some logging in September. And a couple other places, maybe. Can't seem to get any more info than that. Really confusing.
Hedgerow
HACK
Ask Ed who's doing the logging.
I may know them. If so, could make things easier on us.
I sent him an email just now. Hopefully he can find out. Would be really cool to get an inside edge.
There is a mill near Neosho, MO, just off hwy 60. Did you know it was there?
Didn't know that. But that's a ways from me.
Wish I had a setup similar to Doug's.
