Oklahoma,AR,MO,KS,TX GTG (Next GTG 08/27/2016 ) Fort Scott, KS
- Thread starter Work Saw Collector
- Start date
Help Support Arborist Forum:
Any interest in NFS creamsickles at Ft. Scott? I know my saws are boring but they do what I need them to do...
Bring 'em. Just so those of us who have a wider brand experience have some to disparage.[emoji79]
Actually, I wish I still had the big bore MS650 I put together. Just so we could have it to run comparison tests.
But, five Benjamins take up less space in the garage.[emoji6]
But, five Benjamins take up less space in the garage.[emoji6]
SteveSS
Addicted to ArboristSite
Morning gents. 58 degrees when I woke up today. Have a good one.
Morning midlanders!
Threatening rain here. We actually could use some.
Threatening rain here. We actually could use some.
034 found a new home. Had to put the wrap handle off his on it as the new one isn't here yet.
No I haven't , did you find me one? The case in question is for a 084, good luck huh.
Can anyone use a Jonsered 520 basket case. It needs piston & ring, bearings and seals.
Cut my losses and give it away, I will.
'All the parts are in the box'. Yes, really! Ran before I took it apart, it did.
Cut my losses and give it away, I will.
'All the parts are in the box'. Yes, really! Ran before I took it apart, it did.
Carl I could use some parts off of it, I should have some trading material you can use.
Don't need no trade. It's all yours Jim.
Your alright Carl, I don't care what Blondie says.
The drowned/submarine 034 is locked up tight as the hinges of hell. Used my new double end puller to remove flywheel.
Edit: rotating assembly is ruined, cylinder and piston look good. No white death in the crankcase.
Would it be possible to use one of the China complete engines for a MS360 with the handle/tank and gingerbread from this 034?
034 is 'Made in West Germany' so it is really early model.
Edit: rotating assembly is ruined, cylinder and piston look good. No white death in the crankcase.
Would it be possible to use one of the China complete engines for a MS360 with the handle/tank and gingerbread from this 034?
034 is 'Made in West Germany' so it is really early model.
Hedgerow
HACK
No luck here Jim..
Hedgerow
HACK
I changed a u joint in the f350 tonight..
Gack....
The most miserable u joint I've ever replaced..
Had to torch the old one out.
Then had to beat the splined shaft back on...
What a mess..
That job called for a hoist and 2 men, not just me laying under the truck.
Gack....
The most miserable u joint I've ever replaced..
Had to torch the old one out.
Then had to beat the splined shaft back on...
What a mess..
That job called for a hoist and 2 men, not just me laying under the truck.
SteveSS
Addicted to ArboristSite
I need to do a fuel pump in my Cherokee. Wanna come help? 
cobey
Addicted to ArboristSite
cobey
Addicted to ArboristSite
I have a 5.4 triton to put timing chains in........
cobey
Addicted to ArboristSite
I got a few bigger logs to take to ft Scott
Part of an elm that's probably 36" or better at the
Thickest part...... one log my dad got is probably 18" and 20 ft long
Unknown wood
Part of an elm that's probably 36" or better at the
Thickest part...... one log my dad got is probably 18" and 20 ft long
Unknown wood
