Want to Buy Poluan Pro 505/JR 2083 cylinder and piston

[Godzilla]

Have an old PP 415 that is getting tired and I would like to upgrade it while i'm rebuilding it. If someone out there has a good one or knows where to locate one please let me know

Thanks

 

[Bill G]

I have a complete and dam nice 505 saw

 

[Acornhill]

There is a complete NOS 505 kit on eBay now

Sent from my LG-D800 using Tapatalk

 

[Jacob J.]

There is a complete NOS 505 kit on eBay now

Sent from my LG-D800 using Tapatalk

According to the pictures, it's the 52mm set, not the 54mm set. So if the OP is cool with the 52mm set, that would work.

 

[Tractorsaw1]

Scott over at chainsawr probably has what he is lookin for

 

[Acornhill]

Good luck

Sent from my LG-D800 using Tapatalk

 

[Jacob J.]

Scott over at chainsawr probably has what he is lookin for

Possibly now, though I checked with Scott in January about getting a 54mm 505 or 50mm 445 top end and he didn't have either of those at the time.

 

[Tractorsaw1]

Yes, 445 gonna be real hard to come by, 505 easier. Ask, never know

 

[Godzilla]

Thanks for all the leads guys. After looking for other parts it needs ive realized its not worth fixing. So much is NLA which caught me by surprise but i guess its been 10 years out of production. It will go on the shelf with the oldies. Thanks again for all the help.

 

[Tractorsaw1]

Be patient. 1 will turn up. Not everything is available but most things necessary are

 

[Acornhill]

What all does it need?

Sent from my LG-D800 using Tapatalk

 

[Godzilla]

The plastic t that drives the oiler off the clutch, and the anti vibe is shot

 

[Acornhill]

You can get both of those on ebay

Sent from my LG-D800 using Tapatalk

 

[Acornhill]

Give me part #'s I will check

Sent from my LG-D800 using Tapatalk