poulan 2050 carb adj

[philr85]

i was wondering if anyone had an idea what to set the L&H jets to on this model "poulan 2050 pioneer" its all messed up satarts 4 a sec then dies yeh its full of gas

 

[scottr]

Search forum

Philr85 , read this thread http://www.arboristsite.com/showthread.php?t=5208

 

[Cut4fun]

Just to let you know how lean the poulans are. I just got a poulan pro 220 from TX. It still had limiter caps on and was a 2001 year. The H was set at 1/2 turn out from needle seated postion and could only be turned to 3/4 max with caps on. I pulled the muffler and took out the baffle and screen and opened the back holes with the screwdriver too. It took just past 1 1/4 turns to get the 4 stroking sound you talk about. Just showing 1/2 turn from factory seems to lean. The rpm's it was doing put the fear of the lean condition in my mind too. Now I feel better about it being alittle richer.

 

[philr85]

the hi is 1/2 and what wa the low?

 

[philr85]

i have life it seems to be at half throttle though so i still got a ways to ill be back at it after i wash the dish's ..... gee's