SawTroll and fishhuntcutwood, thanks for the advise!!!

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

NYH1

Tacticle Chainsaw Operator.
Joined
Oct 1, 2006
Messages
1,378
Reaction score
543
Location
Central New Yorkistan
You guys recommended using a "yellow chain" instead of the "green chain". So today I bought a PM chain for my 021. I can't believe how much better it cuts then the PM1 chain I had been using. Between switching from a 16 inch bar and chain down to a 14 inch bar and chain. Then going from the PM1 chain to the PM chain it cuts a 10 inch log in about 2/3's the time it did before! This saw in no powerhouse by any means, but by switching to the shorter bar and the PM chain it will work a lot better for me.

I'm going to get rid of the 20 inch bar and RM2 chain on my 029 and replace them with a 18 inch bar and RM chain. Again thanks for the advise!

Here is my original post. :laugh:
 
good forum

This is the only forum I have joined where people actually care about other people and try to help.Yeah sure there are a couple of "a" holes,but the sticky one is gone!Two more to go.Thanks to everyone for the help and the humor!Have a happy vets day Saturday,and just remember.
Ed
 

Latest posts

Back
Top