Sc252 grinder not charging battery...

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Topfli8979

New Member
Joined
Nov 3, 2021
Messages
4
Reaction score
1
Location
Usa
My sc252 is operating as it should.... But it's not charging the battery from the stator. I've found no fuses??? Under the hood. My mowers have a charging fuse. Is there a fuse block I'm over looking?
 
If its the kohler motor, they are reknown for the magnets letting go of there adhesion around the stator and failling to charge.
I had it happen and so did my friend , I managed to glue them back even one that was cracked in half. There is a certain order they go in according to their polarity. Watch the video below and don't underestimate that guy.
 
Thanks for responses,. Wasn't my magnets unfortunately, they are all still attached. I Think stator is on its way out. Appreciate the help.
 
Have you tested the rectifier/regulator like he does in the video.
AC input, regulated DC output.
Isolate the stator and measure its output w/o regulator???
Yes I have, even swapped with a known good one. Only getting 21 volts ac from the stator plug. Thats gotta be my problem.
 

Latest posts

Back
Top