Stihl 019 top handle assembly

[No face 243]

I have an older stihl 019 that I'm am slowly piecing back together I just purchased what I need to re assemble the top handle does anyone have a picture that I could see to make sure it is put together correctly? Mine came with multiple handle components missing
Thank you

 

[Poleman]

http://www.smaf-touseau.com/doc/97

 

[No face 243]

Thank u, I was also looking for the actual saw with one of its top handle sides removed.

 

[Poleman]

Hopefully this may help a little....

 

[No face 243]

Thank u, it's the top handle where the throttle and choke lever and safety lock are

 

[Poleman]

Are you trying to put the handle, linkage and wires back together?

 

[No face 243]

Yes oh, I have the handle apart because when I got it it was missing the kill switch lever and the lock lever. So I pulled the handle apart so the handle that goes across the body of the saw to attach to the top and all that part's all off

 

[PogoInTheWoods]

One of those can be a challenge when you know how to do it. Getting one already disassembled can drive ya nuts. (Ask me how I know. LOL) Hope this helps a little.

You'll also want to make sure the throttle cable is seated correctly at both ends. Below is an idea of the arrangement at the carb end.

​

 

[PogoInTheWoods]

BTW, the choke is relatively independent of the top handle assembly except for the high idle throttle lock relationship which actually occurs at the carb iirc.

 

[No face 243]

Thank you Garth that's very helpful, lol I mean thank u that's just what I was looking for

 

[PogoInTheWoods]

That saw will really surprise you when you get it running right.

Party on.

 

[No face 243]

That's really exciting I'm hoping it will.