Need help with my Stihl 046 AV

[Rodbolt]

I ordered a seal kit for my 046 and my clutch side seal is bigger than what came in the bag. OEM Stihl kit part number 1128-007-1052
Also my oil pump is different than what the pictures look like it should have. My oil pump looks like the one for a 036
My serial number is 118351871 and the numbers under the handle are DN 11307 1122 791 1000
There is also a 311Y on a sticker on the top cover. Can anyone tell anything from these numbers and pictures?
Thanks

 

[Rodbolt]

I called a couple of Stihl dealers and they couldn't tell me anything.

 

[RedneckChainsawRepair]

That saw dont look like a 046 to me. I dont know stihls that well at all though. Think 064? @huskihl ?

I ran your number and said invalid in the online decode. So may have not been registered when new.

 

[RedneckChainsawRepair]

This part # 11227911000 comes back to 064 early 066. I'm still guessing 064

 

[huskihl]

Going by the oil pump, the carburetor box, top cover screws, and the gasket on the intake, you have an 064

 

[Rodbolt]

Thank you very much for the help. Are there any aftermarket crank seals and oil pump that are any good?

 

[huskihl]

Oil pumps usually don’t go bad. May just need cleaned inside.

 

[stihltech]

If the gear inside the oil pump will spin with your finger, it may still be good.
Get the 064 stuff while you can. Getting obsolete.