Want to Sell Stihl 026 Pro Chainsaw

[sld961]

Very clean Stihl 026 Pro chainsaw for sale. Runs and cuts.

My compression tester says it has 130 psi, but I've been questioning its accuracy, so it could probably use rings, but you can run it as is.

Edit: I just checked two of my other saws and they're reading 20-30 psi lower than when I checked last. I could have swore this saw had 150-160 psi when I first got it, so that makes sense.

Looking to get $275 PHO plus shipping.

 

[fuzz1500]

Clean saw !!!

 

[blsnelling]

Very nice!

 

[redfin]

Good luck with your sale. Mine is the first I grab when I have to cut some crotches in my pile.

 

[Nate66n1]

Man that's a nice one there, now only if I had the moolah haha

 

[sld961]

I just checked my 460 and 034S and they are reading 20-30 low, so I'm almost positive that this saw has 150-160 psi.

 

[redfin]

What gauge are you using?

 

[sld961]

What gauge are you using?

INNOVA 3612 Compression Tester - 4 Piece Kit by Innova http://www.amazon.com/dp/B000EVU89I/ref=cm_sw_r_udp_awd_5acatb1E38QT8

It's got good reviews, but I've been having problems with my Schrader valve and now all the readings seem low.

 

[Nate66n1]

Is it all stock?

 

[sld961]

Is it all stock?

I'm not sure. I got it in a trade. The PO didn't say anything about it being ported, but the exhaust port looks really smooth, so I assume someone cleaned it up. I can take any pictures you want if you can tell by looking at something.

 

[nmurph]

INNOVA 3612 Compression Tester - 4 Piece Kit by Innova http://www.amazon.com/dp/B000EVU89I/ref=cm_sw_r_udp_awd_5acatb1E38QT8

It's got good reviews, but I've been having problems with my Schrader valve and now all the readings seem low.

That's the same one I bought from O'Reilly's. It lasted a month, maybe two.

 

[S Tebo]

Hello,
A friend has asked me to keep an eye out for one for him in this condition- so I might be VERY interested. PM sent. Thanks, Scott

 

[MnSam]

Scott, that would look real nice next to your 036 .

 

[sld961]

Someone asked about the crack on the handle. It is only on one side and the handle is still solid. Here is a close up pic.

 

[S Tebo]

Scott, that would look real nice next to your 036 .

Hey Sam, how are you these days? I already have a MS260 Pro of my own, but trust me- I am half tempted to get this for myself anyway!
Seller- I spoke to my buddy on Sun (we have not talked for a couple of weeks) and he told me that he had recently picked up a clean 028 and so he was good to at the moment. Sorry about the confusion- I thought I had a quick/easy sale for you and a nice saw for him. You have a Nice clean saw at a fair price- someone is gonna get a great deal. Keep well, Scott (PM Sent also)

 

[sld961]

Bump

 

[windthrown]

Fully tunable carb? L & H screws?

 

[sld961]

Fully tunable carb? L & H screws?

Yes sir.

 

[windthrown]

Well, it has all the best 026 features then, like a clear gas tank, tunable carb, adj. oiler, decomp, bigger AF/intellicarb. The handle crack can be fixed by pulling the top black piece and filling it from the inside with JB Weld. I have used that stuff to great effect on Stihl white plastic back handles. I don't need another 026, but if I did...

 

[sld961]

Saw is sold!