AUSSIEJOHN May 31, 2006 A AUSSIEJOHN ArboristSite Lurker Joined May 27, 2006 Messages 11 Location australia May 31, 2006 #1 Is it recomended to run saw after servicing without bar just to get it up and running,will this cause any problems:rockn:
Is it recomended to run saw after servicing without bar just to get it up and running,will this cause any problems:rockn:
sawn_penn May 31, 2006 sawn_penn ArboristSite Guru Joined Feb 1, 2006 Messages 577 Location Australia May 31, 2006 #2 AUSSIEJOHN said: Is it recomended to run saw after servicing without bar just to get it up and running,will this cause any problems:rockn: Click to expand... Sure, just see if it runs. You won't be able to tune it without an appropriate load (bar and chain) for the engine. Don't run it at WOT without a load and without some idea of what it will rev to.
AUSSIEJOHN said: Is it recomended to run saw after servicing without bar just to get it up and running,will this cause any problems:rockn: Click to expand... Sure, just see if it runs. You won't be able to tune it without an appropriate load (bar and chain) for the engine. Don't run it at WOT without a load and without some idea of what it will rev to.
