Sam R
8mm Socket
Hi folks,
Awhile ago I tore down an 041 that had a bad CC gasket, among some other issues. I didn't have tools (a splitter, mainly) to complete the rebuild. It "ran" at time of disassembly, of course with the secondary air leaks it didn't run well.
Some of it has been sold, I still have parts - if anyone has need or use of them I would be happy to part with them for a small amount.
What I have left:
If you would like pics feel free to PM me I can send them; the parts are all in good shape with the above exceptions - it's a 40 year old saw so the paint is a little chipped and all. I really want what's left of it to go to someone can get some use of it. If you want the lot I'll take $40 for it, shipped. If you want individuals, PM me what you would like and we'll talk about it.
Thanks for reading!
Awhile ago I tore down an 041 that had a bad CC gasket, among some other issues. I didn't have tools (a splitter, mainly) to complete the rebuild. It "ran" at time of disassembly, of course with the secondary air leaks it didn't run well.
Some of it has been sold, I still have parts - if anyone has need or use of them I would be happy to part with them for a small amount.
What I have left:
- Cylinder, piston, crankshaft (threads on f/w side are mangled) and crankcase (all disassembled and I have the roller cage for the connecting rod; bearings in CC are shot and one a/v buffer mount is broken) Also, the crankcase, and underside of piston skirts/connecting rod are varnished. This is due to one of the leaks in the CC being on the oil tank side and it sucking up some bar oil. It was not seized when disassembled; rings free, piston/cylinder are not scored; just varnished.
- Top handle/rear handle assembly, rear shroud, bar cover, muffler & muffler cover clutch (no drum/sprocket),
- Air filter cover (w/ 041 Electronic; NOT SUPER/FB plate).
- All 4 a/v buffers (most of these are in fair to good shape).
- The plastic insulating plate that sits on top of the intake flange, underneath the carburetor.
If you would like pics feel free to PM me I can send them; the parts are all in good shape with the above exceptions - it's a 40 year old saw so the paint is a little chipped and all. I really want what's left of it to go to someone can get some use of it. If you want the lot I'll take $40 for it, shipped. If you want individuals, PM me what you would like and we'll talk about it.
Thanks for reading!