tanked
ArboristSite Lurker
For starters a little history on the saw, Its a 075av that was used here in oregon for falling old growth years ago, I got it from a logger that had it sitting in his shed and he said the ignition was junk but that he thought that was the only thing wrong. In one way he was right the ignition was bad so I replaced that and took it out side to try and fire it up, after much pulling on the starter I resorted to dumping some fuel in the carb to get it to fire, when she did fire it went straight to high REV like she was going to scatter.. when I tried to shut it down it wouldn't, due to me forgetting to put the kill wire back in the switch, and choking it wouldn't work either so now panicking I took one for the team and jerked the plug wire off!!! can I ever say ouch!!!! well after tinkering with the carb(complete rebuild, adjusted HL screws and various other things) i think I have a vacuum leak? any help would be great. By the way this is my 2nd of 2 075's I picked up the other one the same way and it runs great. I have compared settings on the carbs and other things between the 2 of them trying to figure this out. any help would be great thanks, Waylon