Nice running STIHL 084 AV with STIHL Bar and chain. Starts easily and runs.
Asking $850 shipped.
Asking $850 shipped.
You can become a Supporting Member which comes with a decal or just click here to donate.
Would look great with your other Stihl's, LeeBeautiful saw! That's a lot of saw for that bar or maybe it just makes it look small
Would look great with your other Stihl's, Lee
Would work well. Gotta vet the compression comments above but the 084 with the Auxiliary Oiler is great for milking.How well would this saw work for milling? With longer bar and rip chain.
Brad I think the "auxiliary" oiler he means is the can hanging on the mill frame by the tip of the bar. With a spigot or regulator of some sort it sends oil down the tube to the "come back" side of the bar to oil b&c in the typical millers cut.The "auxiliary" oiler you're referring to is nothing more than a manual override. Pushing the button does nothing more than set the auto oiler to max.
For sure. Are new cylinders still available for these?Gotta vet the compression comments above but the 084 with the Auxiliary Oiler is great for milking.
I think only Cross has cylinders Brad.For sure. Are new cylinders still available for these?
The manual says hitting the boost button increases flow to 1.7 fl.oz/min where the max output setting only does 1.0. I was talking that setup with the extra tank but it got me thinking.The "auxiliary" oiler you're referring to is nothing more than a manual override. Pushing the button does nothing more than set the auto oiler to max.
Have you checked out the compressing issue? How about a pic of the piston through the exhaust port?
The manual says hitting the boost button increases flow to 1.7 fl.oz/min where the max output setting only does 1.0. I was talking that setup with the extra tank but it got me thinking.
Enter your email address to join: