You can become a Supporting Member which comes with a decal or just click here to donate.
You shouldn't need a new coil just because of that,push the wire lead through the boot and put another lead snap (or whatever they are called)on it.
You shouldn't need a new coil just because of that,push the wire lead through the boot and put another lead snap (or whatever they are called)on it.
Sent from my SM-G892A using Tapatalk
Yes you can get just that end connector, sorry I just can't remember what its called.I’ve never heard of these.. your saying you can replace the end connector?
Oh Lordy do we have a greenhorn here???worse comes to worse you can unscrew the ign lead assembly an just cut one of another to fit if you don’t feel comfortable messing with the plug end terminal
Yes you can get just that end connector, sorry I just can't remember what its called.
Sent from my SM-G892A using Tapatalk
This is a common failure on high hour saws , these plug ends can’t hold up to the high levels of vibration from these newer saws .no need to get upset if your not learning something new everyday your not working hard enough. Some of us do this for a living an see these problems on a daily basis , problems a hobbiest may only see one or two in their lifetime, it’s all based on the volume of saws that come across your bench the more saws you work on the more chance you have to see some off the wall stuff . No one will ever “ know it all “ as these saws are constantly changing yearly but those crazy things you come across an figure out thru the years will never be forgotten that I do know. Bitterness should not be a responce when someone is giving constructive criticism ....
Enter your email address to join: