Evanrude
Addicted to ArboristSite
Stihl MS361 PHO for sale.
First, I would like to tell you the history of this saw. It came to me barely used with a bad bottom end bearing. The bearing was so bad the big end of the rod was hitting the case. I sent the case off to have it professionally repaired (by srcarr52). The spot on the bottom of the saw under the starter cover with the paint missing is not a repair, this is where the welder was grounded.
Once I got the case back, I put new gaskets, seals and lines on the saw. I've vac/pressure tested (passed) and ran this saw for 3-4 hrs without any symptoms of an air leak.
This saw was originally a 'CQ' model with the chain brake mech on the rear handle, I converted it over to a standard 361.
In the pics, I have a plug in the decomp location. I can will install the decomp valve if you wish.
Asking $400 plus shipping.
First, I would like to tell you the history of this saw. It came to me barely used with a bad bottom end bearing. The bearing was so bad the big end of the rod was hitting the case. I sent the case off to have it professionally repaired (by srcarr52). The spot on the bottom of the saw under the starter cover with the paint missing is not a repair, this is where the welder was grounded.
Once I got the case back, I put new gaskets, seals and lines on the saw. I've vac/pressure tested (passed) and ran this saw for 3-4 hrs without any symptoms of an air leak.
This saw was originally a 'CQ' model with the chain brake mech on the rear handle, I converted it over to a standard 361.
In the pics, I have a plug in the decomp location. I can will install the decomp valve if you wish.
Asking $400 plus shipping.