I just acquired a Stihl MS440 Magnum with a 20" bar and chain, and I am in need of an owners manual, service manual, and/or and IPL for this saw. I would be ecstatic to have these in digital form.
The only thing wrong with the saw is a broken choke/ignition switch lever (which I'm attempting to repair as I type, but will probably need to buy a new one).
Also, I am contemplating a 24-25" bar and chain. I have read conflicting reports about the ability of this saw. Most have said that this saw will run up to a 28" bar with no problem (plenty of power), but some have stated that anything over 20" is overkill. I am just using this saw for firewood, and the occasional felling of a tree. Every once in a while, I get into something that a 20" bar is just a little too short for.
One last question. Will this bar/chain combo fit a Stihl 031av? They are both 3/8" pitch 50ga, I haven't taken them off to compare oiler hole positions yet.
Thanks in advance!
The only thing wrong with the saw is a broken choke/ignition switch lever (which I'm attempting to repair as I type, but will probably need to buy a new one).
Also, I am contemplating a 24-25" bar and chain. I have read conflicting reports about the ability of this saw. Most have said that this saw will run up to a 28" bar with no problem (plenty of power), but some have stated that anything over 20" is overkill. I am just using this saw for firewood, and the occasional felling of a tree. Every once in a while, I get into something that a 20" bar is just a little too short for.
One last question. Will this bar/chain combo fit a Stihl 031av? They are both 3/8" pitch 50ga, I haven't taken them off to compare oiler hole positions yet.
Thanks in advance!