• If you have bought, sold or gained information from our Classifieds, please donate to Arborsist Site and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Want to Sell Stihl parts saws

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Harzack223

ArboristSite Operative
Joined
Apr 14, 2009
Messages
478
Reaction score
218
Location
New Hampshire
Hello all, I am trying to thin the herd a little bit. These saws are all not running atm. All of these saws I have barely looked at and am only listing the obvious things I noticed. Also forgot to mention I have a northern tool chain sharpener. It works and all the pieces are with it. The black knob that tightens the bottom plate down has the screw pulled up so it doesnt stay tight. Easy fix I just never got around to it. I would like $60 Shipped for it. All prices DO NOT include shipping. My area code is 03290. (southern New Hampshire)

025 Sold
120 psi
Needs fuel line

034 $125 Sold
150 psi
runs with gas poured into cylinder
fuel line carb kit

360 $125 Sold
160 psi
runs with gas poured into cylinder
This one is in rough shape. I have a few parts I purchased when I planned on rebuilding it but I just don't have the time. previous owner smoked the clutch, melted the oil worm gear, melted the oil pump line.
carb kit and fuel lines plus a lot of there little things.

250 $100
Fuel line Sold
carb kit
clutch cover

20141121_102431.jpg 20141121_102441.jpg 20141121_103136.jpg 20141121_103152.jpg 20141121_103813.jpg 20141121_103836.jpg 20141121_103850.jpg 20141121_103901.jpg 20141121_103912.jpg
 
Was going to post the echo separate and it slipped my mind. the echo is a cs-3000 and the clutch cover says cs-346. That one is a runner. It needs a new sprocket and chain. The sprocket is well worn and the chain would bind up and cause it to die. I will take $75 plus shipping for it.
 
lts kool to see some saws that are not straight off the dealer's shelf with a shiny new Jap bar. This thread shows you 'why' a Stihl pro saw holds its value. Many other makes would have hit the landfill many years before. Now how will my 550xp look in 1.5 decades lol:laugh:
 
Do you have any Stihl bars for sale looking in the 30 to 36" range 3/8 pitch for 045 super
 
Back
Top