Stihl serial #

[russ61]

Picked up a basket case Stihl.No model visable,serial # 5825751.Can any body put this with a model?
Thanks Russ

 

[John Bartley]

Stihl can tell you. If you give your local Stihl dealer the serial number, they can get hold of Stihl and tell you what you need to know.

cheers

 

[husky hustler]

Not showing a registered model. Computer says invalid serial number for 5825751. Is there any other distinguishing marks?

 

[Gabby]

Picked up a basket case Stihl.No model visable,serial # 5825751.Can any body put this with a model?
Thanks Russ

Pictures?

 

[russ61]

distinguishing marks?IT looks like it was hit by a truck! From what I can measure it has about a 1.7 bore,don't have a long enough torx to pull the cyl yet.It had the old air cleaner like a 076.Any ideas?
Russ

 

[GASoline71]

If able post a picture...

Gary

 

[russ61]

No picture,camera in shop

 

[husky hustler]

Ouch, broke saw and a broke camera. Is there any stamped Stihl numbers on say the cylinder head? It should be a xxx-xxx-xxxx type number. That would be the biggest help.

 

[Lakeside53]

That serial number is very old... long time before computer records...

 

[Lakeside53]

Ouch, broke saw and a broke camera. Is there any stamped Stihl numbers on say the cylinder head? It should be a xxx-xxx-xxxx type number. That would be the biggest help.

+1... YEP!

(you dropped an x... xxxx-xxx-xxxx)

the first four digit on any major part will indicate The family of the saw.

 

[russ61]

041

Kind of took Husky Hustler's advice,googled the number on the fan wheel and it came back as an 041.Using the search and found this saw has quite a following.It has points ignition ,can't get the flywheel off yet,but the condenser has come loose and is flopping around!Ebayed and found alot of parts available.Thinking about doing a complete rebuild,bearings seals rings.Worth fixing up?Never gone quite that deep in a saw ,but have overhauled everything from briggs to Cat and deitroit diesels.On Acres site I learned that the super has alot bigger bore .Would a super cyl fit on a regular farm boss?
Thanks for the help guys Russ